- #Logilink wiki update
- #Logilink wiki registration
- #Logilink wiki software
MyPBX supports three-party video conferences without an external MCU.
If you hang up the window is closed and the webcam is deactivated. When there is a video call, the launcher activates the webcam of the PC and opens a window showing your own image and the image of the remote party. Deactivating video deactivates both directions. Adding video only activates sending the own video image. That means that the user can add and remove video during a phone call. When the call is terminated, the button is reset to the default setting, given by the default call type configured in the launcher.įrom version 11 media escalation and one-way video is supported. If the launcher is connected to the selected phone, a camera button shows up in the web application next to the selected phone.Ĭlicking the button activates or deactivates video.
If needed, configure a proxy server (ip-address:port) for connecting to the phone. Especially when using HTTPS, this can create substantial load on the PBX. Also, it will impose increased CPU load on the PBX cause the launcher will constantly retry the connection attempt and query the PBX for the phone's address for each attempt. Failure to do so will result in non-functional video/app-sharing service. Also, when you set the Allowed stations restriction ion Services/HTTP you must make sure that the PC running the myPBX launcher is still allowed. This can be a challenge if the site has separated voice (phone) and data (PC) networks. While there is no need for a specific configuration on the phone to make myPBX Video work, you must make sure that the myPBX launcher (that is, the PC running myPBX) can establish an HTTP(S) connection to the users phone. Enable the video license on the user object. In the following, it is assumed that the user already has a phone configured and myPBX running. The video codec uses UDP ports starting from 50000. Graphics card with H.264 hardware support (otherwise video will be shown with delay). #Logilink wiki software
innovaphone software phone (v11 or higher).innovaphone hardware phone with recent firmware (v11 or higher) (not for DECT phones like IP61, IP62, IP63).
#Logilink wiki registration
Note: The video license information must be available in the PBX at the time of the registration of the phone.
Video license (enabled at the user object). myPBX license (enabled at the user object). The endpoint for audio streams is still the audio codec on the phone. The endpoint for video streams is the video codec on the computer. Once it is connected the phone negotiates video calls. The video codec communicates with the phone using SOAP over Websocket. The windows h264 encoder is configured to deliver an average data rate of 250 kbps. likewise is done for the frame rate: if available, 30 fps is used, if not 15 fps. myPBX checks the resolution supported by the webcam. Windows is not used by default because its decoder introduces a long delay (1-2 sec.), unacceptable for a video call. If the graphic does not support H.264, which would be uncommon, windows will be used for the decoding process. The video codec is part of the myPBX launcher and uses the webcam, windows for H.264 encoding and graphic card of the computer for H.264 decoding. myPBX video adds an H.264 video codec to innovaphone hardware and software phones. #Logilink wiki update
6.6 Microsoft Update for the Windows 7 h264 decoder.6.4 Webcam support under Media Foundation from Microsoft.6.3 Integrated Webcam in Dell Vostro Laptops.
0 kommentar(er)
